Targus Computer Hardware TGRMS20 User Manual

USB 2.0 Memory Card Reader/Writer  
TGRMS20  
System Requirements  
Connection  
USB 2.0 Port for HiSpeed data transfer  
Minimum Operating System Support  
Windows  
o Windows 98SE (driver installation required)  
o Windows ME  
o Windows 2000  
o Windows Vista  
o Windows XP  
Macintosh  
o Mac OS 9.2+, 10.2+  
Unpacking Package Contents  
USB 2.0 Memory Card Reader/Writer  
USB Extension Cable  
User’s Manual  
 
Connecting  
Connecting the Targus USB 2.0 Reader/Writer to the USB port is simple. You don’t need to turn  
off or restart your computer when attaching the Targus USB 2.0 Reader/Writer. Since the  
Targus USB 2.0 Reader/Writer is powered by the USB connection, an AC/DC power adaptor is  
NOT needed.  
Before connecting the Targus USB 2.0 Reader/Writer, complete the device driver  
installation. See INSTALLING.  
Use the USB cable to connect your card reader/writer to the computer directly.  
When the Targus USB 2.0 Reader/Writer is connected for the first time, your computer may  
display a message that the device is being installed (may vary slightly depending on your  
operating system).  
Windows Disk Icons  
When you connect the Targus USB 2.0 Reader/Writer on a Windows operating system, a newly  
assigned removable disk icon drive letter representing the card slot will be shown in “My  
Computer”.  
Macintosh Disk Icons  
When you connect the Targus USB 2.0 Reader/Writer on a Macintosh operating system, a  
removable disk icon labeled “untitled” representing the card slot will show on the desktop  
when a card is inserted.  
 
Using  
NOTE: WHEN INSERTING YOUR MEMORY CARD, THE CARD READER SHOULD BE HELD WITH  
THE TARGUS LOGO FACING UP.  
The Targus USB 2.0 Memory Stick Card Reader/Writer has one card slot which is only  
compatible with Memory Stick (MS) Memory Cards.  
Inserting Cards  
To insert your Memory Stick memory card into the Targus USB 2.0 Reader/Writer slot insert the  
connector end of the card with the card label facing up. DO NOT force the card into the slot.  
Using it on a PC  
Here is the way to create a Folder on your Desktop and Copy and Paste your photos to it.  
1. How to create a FOLDER on your Desktop  
A. Place your mouse pointer somewhere on the Desktop but not on an icon.  
B. Click once with the right mouse button, move your mouse pointer over NEW then  
click FOLDER with the LEFT mouse button.  
C. This will create a NEW FOLDER on your Desktop. At this time you can name anything  
you like, i.e. My Pictures or My Photos, by typing the name in. When you are  
finished typing press the ENTER key on your keyboard. Now the folder name is  
saved.  
2. How to copy and paste your photos into a folder  
A. Double click on the icon “My Computer”.  
 
B. Double click on the removable disk drive (for the Targus USB 2.0 Reader/Writer), i.e.  
E: or F: or maybe G: Now you should see a folder DCIM (that stands for Digital  
Camera Images).  
C. Double click on the DCIM folder. Now you should see your camera folder, i.e.  
100Olymp or 100Canon or 100Fuji.  
D. Double click on the camera folder. Now you should see your pictures or picture file  
names (depending on what Operating System you are using).  
E. Go up to the menu bar where it says “EDIT” and click “Select All”. You will see all of  
your pictures HIGHLIGHTED.  
F. Go back to “EDIT” and now click “COPY”. Close or minimize this window.  
G. Double click on the folder you created on your Desktop, go to “EDIT” then click  
“Paste” and you should see the pictures being copied to the folder.  
H. To view your pictures, double click on the File name and the picture will open up.  
Removing Card  
To remove the card in Windows:  
1. Double click on the icon “My Computer”.  
2. Rightclick on the corresponding Targus USB 2.0 Reader/Writer drive icon.  
3. Select Eject (this is not needed for Windows 98SE or XP).  
4. Pull the card out of the slot.  
To remove the card on a Macintosh  
1. Drag the “untitled” icon into the Trash.  
2. Pull the card out of the slot.  
Disconnecting  
If a drive window is open or the Targus USB 2.0 Reader/Writer is active, close any associated  
windows before attempting to remove the card reader/writer.  
 
Windows  
Use the hotplug icon in the notification area of the taskbar to safely stop the device before  
unplugging it. The notification area is on the right side of the taskbar where you usually see the  
time displayed.  
These steps are not required for Windows 98SE or XP.  
1. In the notification area, rightclick on the hotplug icon.  
2. Select the device you want to unplug then click STOP.  
3. When Windows notifies you that it is safe to do so, unplug the Targus USB 2.0  
Reader/Writer from your computer.  
Macintosh  
1. Drag the Targus USB 2.0 Reader/Writer “untitled” icon into the Trash.  
2. Unplug the device.  
 
Technical Support  
Please do not attempt to fix the product by yourself. If you are experiencing any problems with  
your card reader/writer please do not return it to the store from where it was purchased. You  
can contact our technical support representatives and they will assist you with any questions  
you may have. For assistance operating your product please consult the User’s Manual or feel  
free to contact Targus Digital LLC technical support:  
180 Maiden Lane  
28th Floor  
New York, New York 10038  
 

Sharp Copier AR 160 User Manual
Sony Car Speaker XS 4624 User Manual
Sony Digital Camera 4 412 225 221 User Manual
Sony Headphones MDR EX34SC User Manual
Sony Laptop VPCJ1 User Manual
Sony Universal Remote DAV FR10W User Manual
Spalding Fitness Equipment M300011 User Manual
Sterling Fan 8820044000 SC6 6106 User Manual
Sterling Plumbing Indoor Furnishings C711FSER User Manual
Sub Zero Refrigerator ICBBI 30UG User Manual