3.5in eSATA USB Black SATA External Hard
Drive Enclosure
SAT3510BU2E
SAT3510BUEGB
SAT3510BUEEU
*actual product may vary from photos
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Manual Revision: 04/18/2013
Table of Contents
Introduction ...........................................................................................1
Features ........................................................................................................................................................ 1
Package Contents ..................................................................................................................................... 1
Hardware Guide .....................................................................................2
Rear Panel .................................................................................................................................................... 2
Hardware Installation............................................................................2
Inserting a Hard Drive.............................................................................................................................. 2
Removing a Hard Drive........................................................................................................................... 4
Recognizing the Hard Drive .................................................................5
Windows XP ................................................................................................................................................ 5
Windows Vista™ ......................................................................................................................................... 7
Safe Drive Removal................................................................................8
Specifications .......................................................................................9
Technical Support ..................................................................................10
Warranty Information............................................................................10
Instruction Manual
i
Introduction
Thank you for purchasing a StarTech.com InfoSafe 3.5”eSATA/USB 2.0 Removable SATA
HD Enclosure. Supporting the latest generation of hard drive storage (up to 1TB SATA
hard drives), this enclosure allows the use of any 3.5”SATA II (SATA /300) or SATA (SATA
/150) and can be connected to a host computer using either eSATA or USB.
Features
•
Built-in 40mm fan to provide efficient cooling of enclosed hard drive
•
Durable construction, comprised of metal and hard ABS material helps
to minimize damage to the hard drive while in transit, and enhance
drive heat dissipation
•
Built-in stand offers stable vertical design offers optimal removal and
insertion of hard drive
•
•
•
Rear power ON/OFF button
Highly visible front LED lights indicate power and hard drive activity
Plug and Play support
Package Contents
•
•
•
•
•
1 x Enclosure
1 x eSATA Cable
1 x Manual
1 x Power Adapter
1 x USB 2.0 Cable
Instruction Manual
1
Hardware Guide
Rear Panel
Power Button
USB Output
DC Power
Adapter Input
eSATA Output
Fan
Hardware Installation
Inserting a Hard Drive
1. Unlock the keylock situated on the front of the SAT3510BU2E.
Instruction Manual
2
2. Lift the handle on the front panel and pull the front panel door out from
the body (as shown below).
3. Place the hard drive into the SAT3510BU2E, SAT3510BUEGB, SAT3510BUEEU.
The printed label on the hard drive should be on the right hand side, with the SATA
connector on the lower half of the drive.
4. Push the door to slide the hard drive into place. Do not push the hard drive into the
enclosure by hand, otherwise it may not be properly installed.
5. Turn the key lock into lock position to complete the physical installation.
Instruction Manual
3
Removing a Hard Drive
1. Unlock the key lock.
2. Lift the handle on the front panel and pull the front panel door out from
the body.
3. Carefully remove the hard drive from the enclosure.
Instruction Manual
4
4. Close the door. It is suggested that you lock the key lock.
Recognizing the Hard Drive
Windows XP
USB 2.0
If you are using the USB 2.0 interface to connect the hard drive to your computer, no
setup is required. Simply plug the hard drive into an available USB port and turn the
power on to the SAT3510BU2E.
When you open My Computer the drive should be visible under the heading Devices
with Removable Storage.
eSATA
If you are using the eSATA interface to connect the hard drive to your computer, there
are two setup processes you can follow.
If the hard drive is powered on upon booting up the computer, it will automatically
detect the drive. Otherwise, if you connect and power on the hard drive once the
computer has already been booted up, you will need to open the Device Manager to
scan for it.
The following directions outline the necessary steps to access your hard drive when
the computer has already been booted up:
Instruction Manual
5
1. Right-click My Computer and click Manage.
2. In the left pane, select Device Manager.
3. In the Device Manager window, click the “+”next to Disk Drives. Since
the drive was not powered on during the boot up process, it should not
yet be visible.
4. Turn on the SAT3510BU2E, SAT3510BUEGB, SAT3510BUEEU. Once the power indicator is
illuminated, click the Scan button.
5. The Device Manager will scan for plug and play hardware. Once it has completed
the scan, your drive should be visible below the Disk Drives heading.
Instruction Manual
6
Windows Vista™ / 7
USB 2.0
If you are using the USB 2.0 interface to connect the hard drive to your computer, no
setup is required. Simply plug the hard drive into an available USB port and turn the
power on to the SAT3510BU2E, SAT3510BUEGB, SAT3510BUEEU. Open My Computer
and the drive should be visible under the heading “Devices with Removable Storage.”
eSATA
If you are using the eSATA interface to connect the hard drive to your computer, there
are two setup processes you can follow.
If the hard drive is powered on upon booting up the computer, it will automatically
detect the drive. Otherwise, if you connect and power on the hard drive once the
computer has already been booted up, you will need to open the Device Manager to
scan for it. The following directions outline the necessary steps to access your hard
drive when the computer has already been booted up:
1. Right-click Computer, and select Manage.
Instruction Manual
7
2. In the left pane of the Computer Management window, select “Device Manager.”
3. Turn on the SAT3510BU2E. Once the power indicator is illuminated, click the“Scan”button.
Scan button
4. The Device Manager will begin an installation of the necessary driver software. Once
it has completed the scan, your drive should be visible below the Disk Drives heading.
Safe Drive Removal
Ensure that any programs that have accessed the drive are closed.
You may wish to use your operating system’s “safe removal”feature to be absolutely
sure that no data is being written to or read from the hard drive in the enclosure when
you disconnect it from the computer.
In Windows, you can click the Safe Remove icon (see above) and choose the enclosure
from the menu. In Mac OS, you can drag the icon for the drive to the trash to “eject”it
and stop it safely.
You can now safely remove the USB 2.0 data cable from the enclosure.
Instruction Manual
8
Specifications
SAT3510BU2E / SAT3510BUEGB / SAT3510BUEEU
1 x eSATA Plug
Connector Types
Chipset
1 x USB B Female
INIC 1611
3Gb/s (eSATA)
Data Transfer Rate
Drive Capacity Support
Drive Type Compatibility
480Mbps (USB 2.0)
Up to 1 TB
SATA 300 (SATA II)
SATA 150 (SATA I)
Windows 98SE, ME, 2000 XP, Vista™, 7
Mac OS 8.6, 10.0 and up; Linux
O/S Compatibility
Instruction Manual
9
Technical Support
StarTech.com’s lifetime technical support is an integral part of our commitment to
provide industry-leading solutions. If you ever need help with your product, visit
documentation, and downloads.
Warranty Information
This product is backed by a two year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase.
During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only.
StarTech.com does not warrant its products from defects or damages arising from
misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their
officers, directors, employees or agents) for any damages (whether direct or indirect,
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,
or any pecuniary loss, arising out of or related to the use of the product exceed the
actual price paid for the product. Some states do not allow the exclusion or limitation
of incidental or consequential damages. If such laws apply, the limitations or exclusions
contained in this statement may not apply to you.
Instruction Manual
10
Hard-to-find made easy. At StarTech.com, that isn’t a slogan. It’s a promise.
StarTech.com is your one-stop source for every connectivity part you need. From
the latest technology to legacy products — and all the parts that bridge the old and
new — we can help you find the parts that connect your solutions.
We make it easy to locate the parts, and we quickly deliver them wherever they need
to go. Just talk to one of our tech advisors or visit our website. You’ll be connected to
the products you need in no time.
to access exclusive resources and time-saving tools.
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology
parts. StarTech.com was founded in 1985 and has operations in the United States,
Canada, the United Kingdom and Taiwan servicing a worldwide market.
|